Gold Member Since 2016
Audited Supplier
Suzhou Xuan Yan Machinery Manufacturing Co., Ltd.

Hydraulic Trim Press, Hydraulic Press, Oil Hydraulic Press manufacturer / supplier in China, offering SGS Hydrulic Trim Press for SD4-40hmm, SGS Hydraulic Trim Press for Xy4-60hhs, SGS Hydraulic Trim Press with Equipped Core Pulling and so on.

(/ )

Supplier Homepage Product Elite series SGS Hydrulic Trim Press for SD4-40hmm

SGS Hydrulic Trim Press for SD4-40hmm

FOB Price: US $72,000-72,500 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $72,000-72,500/ Piece
Get Latest Price
Port: Shanghai, China
Production Capacity: 200
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: SD4-40HMM
  • Feature: Automation
  • Condition: New
  • Warranty: 12 Months
  • Transport Package: Wood Case
  • Type: Four-Column Hydraulic Press
  • Certification: SGS
  • Customized: Customized
  • Trademark: xuanyan
  • Origin: Suzhou
Product Description
The tirm press shall meet the following mechianical specifications:
1.Max. Cycle Time (sec)        20sec. (Ram down, Ram up, tilt 120 degrees.
2.Minimum Tonnage           40 metric tonne 
3.Shut Height                 450mm      
4.Platen Stroke              (1500mm)                           
5.the stroke shall take into account the bottom platen overturn space and the rotation shall not intervene with the top die. The thickness of the top die is 500mm. 
6.The robot for placing and extracting parts will be installed on the side of the trim press. The maximum stroke of the die opening must allow the robot to enter freely.
7. The design of the trim press must allow the top die to stop at any position. The top die shall stop 10cm above the bottom die after trimming, eject the part out and move to adequate height. Then the robot will extract the parts and the bottom plate will turn over
8. The base platen shall be turn over type. The maximum overturn angle is 120 degree and the angle can be adjusted as needed. Platen turnover must not have hard impact at the end of stroke and must have adjustable speed.
9. The base platen shall be able to bear 2 T during turn over.
 
specificationunitSD4-40HMM
Clamping forceT40
Mold opening forceT8.1
Distance Between Tie Bars(l*w)mm1200*1050
Min mold thickness(B)mm450
Clamping strokemm1000
Max opening(B)mm1450
System pressurekg/cm140
Motor powerKw/hp11(15)
Total wattagekw11
Machine weightT10.5
Machine Dimensions (L*W*H)M2.2*2.0*5.6

SGS Hydrulic Trim Press for SD4-40hmm
 
Send your message to this supplier
Avatar
Miss June
*From:
To: Miss June
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now