1. We choose Omron's PLC and HMI as control system and have unique programming designs.
- More safe. Our engineers add many system alarms for safe operating, such as one hand operating alarm, safety light curtain alarm etc.
- More convenient. Humanized operating interfaces designed by our programmers are easy, understandable and convenient to maintain.
2. Standard machines have the function of blowing the dross from the workbench. In addition, the length of blowing time is adjustable.
3. Hydraulic press of this series has very high speed for punching, longstroke of mold opening which is suitable for trimming die.
4. Its humanized design of dross grooves and protective guards is helpful to keep the workshop clear.
5. The smaller cylinder is used for quickly mold closing while the bigger one is responsible for punching. It is obvious that the high speed turns to low speed.
6. Water cooler is applied in the standard series.
3-7. As to the hydraulic components, we absolutely choose well-known domestic and abroad brands, in order to guarantee the life of hydraulic press.
8. The oil tank is completely sealed structure, which keeps hydraulic system working efficiently and stably.
The maximum overturn angle is 120 degree and the angle can be adjusted as needed, platen turnover have adjustable speed.
The stroke shall take into account the bottom platen overturn space and the rotation shall not intervene with the top die .the thickness of the top die is ?
Slow approach speed .
The trim press have 4 core pull circuits C/W pressure & flow control. two on each of the moving(upper)and tilt (lower)platens respectively.
There should be a funnel to collect all the waste to the conveyor below the machine when the base platen overturns.
|Mold opening force||T||8.8|
|distance between tie bars(l*w)||mm||1200*800|
|Min mold thickness(B)||mm||400|
|Machine dimensions (L*W*H)||m||2.1*1.8*4.2|